Router IBM High Rate Wireless LAN Gateway (DR-E200W) - Admin Login & Configuration Guide
IP Address: 192.168.1.1
Username: N/A
Password: N/A
Using your local IP address, select the appropriate IP address from the list above and click 'Admin.' This will direct you to your router's administration interface.
- IP Address:
- Username & Password:
- n|a | ascend
- IP Address:
- Username & Password:
- n|a | (none)
- IP Address:
- Username & Password:
- n|a | admin
- IP Address:
- Username & Password:
- storwatch | specialist
- IP Address:
- Username & Password:
- n|a | R1QTPS
Accessing the High Rate Wireless LAN Gateway (DR-E200W) Admin Panel
-
Connect Your Device:
Use a PC or laptop and connect it to the router. Preferably, use an Ethernet cable for a stable connection, although Wi-Fi can also be used. A wired connection ensures uninterrupted access during the setup process.
Use a direct wired connection -
Open Your Browser:
Launch a web browser (such as Chrome, Firefox, or Safari) and enter the router's IP address into the address bar. This IP address is usually printed on a label on the back or bottom of the router. Be sure to check the back of your High Rate Wireless LAN Gateway (DR-E200W) to find detailed information, including the IP address, username, and default password. -
Enter the Login Credentials:
On the login page, enter the default username and password for the High Rate Wireless LAN Gateway (DR-E200W) device. If you're unsure, check the IBM label or the documentation to get these details.
Check the back of the router -
Access the Admin Panel:
Once logged in, you'll be redirected to the router's admin interface. From here, you can customize settings, update the firmware, or troubleshoot network issues.
Admin panel interface
Routers Support for High Rate Wireless LAN Gateway (DR-E200W)
If you experience issues logging into your High Rate Wireless LAN Gateway (DR-E200W) router, follow these simple steps to resolve them: First, ensure your device is properly connected to the router via Wi-Fi or an Ethernet cable. Next, verify the router’s IP address (commonly 192.168.0.1 or 192.168.1.1) and enter it correctly into your browser’s address bar. If login fails, try using the default username and password, which can usually be found on a label attached to the High Rate Wireless LAN Gateway (DR-E200W) router. If you have changed the credentials and forgotten them, press the reset button on the back of the High Rate Wireless LAN Gateway (DR-E200W) router to restore the factory settings, then attempt to log in again.
Frequently Asked Questions:
-
Forgot Login Password?
Check the default login credentials printed on the High Rate Wireless LAN Gateway (DR-E200W) router’s label. If those don't work, reset the router to factory settings and use the default credentials to log in.
-
What is My Router's Default IP Address?
The default IP address for High Rate Wireless LAN Gateway (DR-E200W) routers is typically 192.168.0.1 or 192.168.1.1. You can find it on the label on the back or underside of the router or in the user manual.
-
Why Can’t I Access the Admin Panel?
Ensure your device is connected to the High Rate Wireless LAN Gateway (DR-E200W) router's network and enter the IP address correctly into the browser's address bar (not the search bar). If issues persist, try clearing your browser cache or switching to another browser.
